Nissan 240SX Information - SR20DET Information

This Page Applies To The SR20DET Engine

Engine Modifications:

Apex'i Power FC & Commander
Apex'i Power Intake
Z32 Nissan 300ZX 3" MAF
GP Sports Type R 3 Core Aluminum Radiator & Cooling Panel
HKS SSQV Blow Off Valve
Walbro 255lph High Pressure Fuel Pump
Summit Oil Filter Relocation Kit
Greddy Oil Pan
Apex'i N1 Catback Exhaust - 3" Pipe , 4.5" Tip


Apex'i SAFC - More Info
Perma-Cool Electric Fan and Thermostat
Summit Battery Relocation Kit

I Purchased The Engine From Yury and Jeff At SR Swap. I got the complete swap which included:

S13 SR20DET Redtop Engine
5 Speed Transmission
Drive Shaft
Downpipe
Stock Side Mount Intercooler and Piping
Cam Angle Sensor (Shipped Me 2 After Inspecting Found Out One Was Broken Thanks Again SR Swap For For Checking It Before Shipping It Out)
Ignitor Chip
Extra Throttle Body (One On Engine Was Broken)
SR ECU and Harness
Power Steering Pump (Used The One From The KA)
AC Compressor (Took It Off Of The Engine)

Yury and Jeff from SR Swap were very helpful and the two times I called them for assistance if they didn't answer the phone right then they called me back within 30 minutes and were able to help me troubleshoot my problems. The install went pretty good we didn't really struggle to much with any one thing. We started the swap Sunday night by removing the KA motor and finished it mid Friday afternoon.

Here is a view from the exhaust manifold side and my intake, I used my MAF adapter plate off of my Injen Intake from my KA24DE and then put the K & N filter on as well. It seems to work pretty well and is much less restrictive than the stock air box the swap came with.

A front view

Another front view showing the pipe to the throttle body you can also see the fuel filter on the top left.

Same as last view just zoomed out a little bit

Intake Manifold View and also showing stock fuel rail and stock 370cc/min side feed injectors.

The Final Completed Picture

Another Intake Manifold View Picture

A shot of the work in progress.